Size and Weight

Dimension: 68*68*22.5mm

Net weight of each scale: 70g

Other Parameters

Rated Voltage: 2.6V-3.6V

Rated Current: <10mA@DC3V

Battery: CR2450 3V Lithium Coin Battery

Maximum weight of each scale: 2000g

Tolerance: ±0.1g / 0.1oz

Resolution: ±0.1g / 0.01oz

Size and Weight

Dimension: 121x40x39.6mm

Weight: 75g

Other Parameters

Operation Voltage: AAA battery X 2

Operation Current: ≤40ma@3.0V

Operation Temperature: 0-50℃

Current Drain: ≤25ua@3V

SIDEBITE F-1 FOAM TIRE ADDITIVE   MAX-08-002

The tires are the ONLY connection between your car and the racetrack. Condition and preparation of the surface can be the difference between victory or defeat. With our SideBite Tire Additives your tire game will always be on point! 

Our SideBite F-1 Foam Tire Additive is odorless and non-toxic to comply with worldwide racing associations rules. Ideal for all track conditions, no matter if carpet, asphalt or concrete.

The solid metal can with plastic top cap allow an easy access with a brush (brush not included).
Developed, produced and filled in Germany! 

Filling qty.: 100ml
Filling tolerance: +/- 5ml


MAX-08-002 contains: 
1x SideBite F-1 Foam Tire Additive (100ml)

INFO: We may use additional parts, cars and/or items to display the use of our above described and named product. This additional parts, cars and/or items are NOT part of the above described and named product. The above described and named product consists only and exclusively the parts mentioned under "The product contains:"
You must read and follow the GENERAL & SAFETY PRECAUTIONS before use, which can be found here:  INSTRUCTIONS

DRIVESHAFT & GEARS OIL   MAX-01-002

Driveshafts and Gears are under high load, which means at the same time this components are exposed to high wear.
It's our goal to minimize the wear without influence of free movement.

Together with a special oil manufacturer in Germany we developed the MXLR Driveshaft & Gears Oil. 
It consists of well chosen high quality ingredients in a special mixture to reduce wear and stay in place under rotation. For this reason, the oil is very thick and sticky! 
There is still the chance that some oil will "fly away" at high RPM's - BUT another special ingredient of our mixture will ensure an ongoing lubrication. 

We recommend to check and service your driveshafts once a day at race/test sessions and add 1-2 drops per shaft.
Our proven 10ml bottle with included metal tip allow an easy maintenance of your RC model to keep it in best shape and on the highest performance level.

MAX-01-002 contains: 
1x MXLR Driveshaft & Gears oil (10ml) 

INFO: We may use additional parts, cars and/or items to display the use of our above described and named product. This additional parts, cars and/or items are NOT part of the above described and named product. The above described and named product consists only and exclusively the parts mentioned under "The product contains:"
You must read and follow the  GENERAL & SAFETY PRECAUTIONS before use, which can be found here:  INSTRUCTIONS

BALL BEARING OIL   MAX-01-001

Friction is the natural enemy of performance. Ball bearings are the preferred remedy to reduce the friction of drivetrains in RC models. To get the best performance out of ball bearings they need some special care and treatment.

Together with a special oil manufacturer in Germany we developed the MXLR Ball Bearing Oil. 
It consists of well chosen high quality ingredients in a special mixture to minimize the friction and extend the free spinning for a MAXimum free drivetrain. Furthermore, it will extend the lifetime of the ball bearings at regular service. 

As we took care to have a super thin oil, it's enough to add 1-2 drops on the sealing of a bearing and it will find its way. 
Our proven 10ml bottle with included metal tip allows an easy maintenance of your RC model to keep it in best shape and on the highest performance level.

MAX-01-001 contains: 
1x MXLR Ball Bearing oil (10ml) 

INFO: We may use additional parts, cars and/or items to display the use of our above described and named product. This additional parts, cars and/or items are NOT part of the above described and named product. The above described and named product consists only and exclusively the parts mentioned under "The product contains:"
You must read and follow the  GENERAL & SAFETY PRECAUTIONS before use, which can be found here:  INSTRUCTIONS

TUNGSTEN BALANCE WEIGHT 5g.   MAX-03-001

The weight distribution of a car is one of the most powerful setup options that most racers overlook!
Space to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! 

Our MXLR Tungsten Balance Weight 5g. is very small in size to fit in nearly every area.
The square layout is also very handy for 1/12 scale cars where the space is limited even more compared to TC cars.

Round corners as well as polished top and lower surface underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).

Size (WxLxT): 10x10x3mm
Weight: 5g. 
Weight tolerance: 4.8-5.2g.

MAX-03-001 contains:
1x MXLR Tungsten Balance Weight 5g.

TUNGSTEN BALANCE WEIGHT 10g.   MAX-03-002

The weight distribution of a car is one of the most powerful setup options that most racers overlook!
Space to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! 

Our MXLR Tungsten Balance Weight 10g. is the same size as the widely known 5g. tire balance weight. 
This shows the big difference in the density and the advantage by using our tungsten weights in your car. 
Double the weight at the same footprint is great opportunity to further optimize the balance and the car performance.

Round corners as well as polished top and lower surface underline the high quality of our Tungsten Weights.
For the installation we recommend to use a thin double sided tape (0.1-0.2mm).

Size (WxLxT): 11x19x3mm
Weight: 10g.
Weight tolerance: 10-10.8g.


MAX-03-002 contains:
1x MXLR Tungsten Balance Weight 10g.

Precision Carbon Wing Mount plates (8PCS)   MAX-05-003

The wing position greatly affects the handling of your car. It's a powerful setup option to adjust your car to certain grip conditions and track layouts. Mounting the wing correctly and especially straight isn't as easy, but very important!

Our CNC cutted Precision Carbon Wing Mount plates are sturdy and lightweight to keep the CG of your bodyshell as low as possible. The plates are mounted one from the inside in the wing mount and one on top of the wing.
We recommend using our Precision Wing Mount set, as the Carbon plates have the same shape and hole pattern as the aluminum drill jig and to match up perfectly. The large footprint of this plates will help on the top side to keep the wing deformation as minor as possible.

Additionally, this set offer the possibility to drill holes in a specific distance to each other in order to change the wing position and affect the handling. The distance between each hole in the drill jig and the Carbon Wing Mount Plates is 2,5mm. This allows you to adjust the wing position in 2,5mm steps inside the same bodyshell. The total adjustment range of 12,5mm. 

 The Precision Carbon Wing Mount Plates are suitable for following Bodyshells: 
- ZooRacing ZooZilla 
- ZooRacing PreoPard 
- ZooRacing DogsBollox 
- ZooRacing HellCat 
- ZooRacing BayBee 
- ZooRacing Wolverine
- ZooRacing ZooDiac
- Xtreme Twister 
- Xtreme Twister Speciale
- Mon-Tech YSOT

Size (WxLxT): 10x22x0,5mm

MAX-05-003 contains: 
8x Precision Carbon Wing Mount plate

The wing position greatly affects the handling of your car. It's a powerful setup option to adjust your car to certain grip conditions and track layouts. Mounting the wing correctly and especially straight isn't as easy, but very important!

For this reason we developed the Precision Wing Mount set to help with the correct and repeatable mounting. 
Our CNC machined aluminum drill jig fits perfectly in the wing mount of the bodyshell which allows to precisely drill the mounting holes for the wing. The included Ti-coated 3.0mm drill bit is guided by the alloy jig during this process. 

Furthermore, the set consists of eight Precision Carbon Wing Mount Plates as well as four M3x8 PA screws and eight M3 PA nuts for the optimal wing attachment. As the wing sit high on the bodyshell its further important to keep the weight as low as possible, that's why we chosen Carbon for the plates and PA for the fasteners. Sturdy and lightweight for the best performance!

The Precision Carbon Wing Mount plates are mounted one from the inside in the wing mount and one on top of the wing. As they have the same shape and hole pattern as the aluminum drill jig, they match up perfectly and further reinforce the mounting on the inside. The large footprint of this plates will help on the top side to keep the wing deformation as minor as possible.

Additionally, this set offer the possibility to drill holes in a specific distance to each other in order to change the wing position and affect the handling. The distance between each hole in the drill jig and the Carbon Wing Mount Plates is 2,5mm. This allows you to adjust the wing position in 2,5mm steps inside the same bodyshell. The total adjustment range of 12,5mm. 

--> Check the manual/instructions here:  INSTRUCTIONS 

 The set is suitable for following Bodyshells: 
- ZooRacing ZooZilla 
- ZooRacing PreoPard 
- ZooRacing DogsBollox 
- ZooRacing HellCat 
- ZooRacing BayBee 
- ZooRacing Wolverine
- ZooRacing ZooDiac
- Xtreme Twister 
- Xtreme Twister Speciale
- Mon-Tech YSOT

MAX-05-002 contains: 
1x MXLR Aluminum drill jig
1x Ti-coated 3,0mm drill 
8x Precision Carbon Wing Mount plate
4x M3x8 PA screw
8x M3 PA nut

INFO: We may use additional parts, cars and/or items to display the use of our above described and named product. This additional parts, cars and/or items are NOT part of the above described and named product. The above described and named product consists only and exclusively the parts mentioned under "The product contains:"
You must read and follow the GENERAL & SAFETY PRECAUTIONS before use, which can be found here:  INSTRUCTIONS

AWESOMATIX CASTER TOOL (4PCS)   MAX-02-001

With the advanced suspension geometry of Awesomatix cars you can set caster, camber and toe by adjusting the turnbuckles.
With the help of a 1/10 scale setup system it's possible to visualize these values. 

To correctly set the caster of your Awesomatix TC you need our MXLR Awesomatix Caster Tools.
Just release the outer round head screw on top of the wheel hub (AM06), and slide in the Caster Tool. 
Now you are able to read and set the caster according to the scale of the used setup system.

Our Caster tools are machined from high quality black anodized aluminum with silver edges and laser engraved logo to underline our key philosophy. They will fit all Awesomatix TC cars beside the very first A700 model from 2011. 

Compatible with following 1/10 scale setup systems: 
- HUDY Aluminum 1/10 TC Setup System 
- G-FORCE Aluminum 1/10 TC Setup System 
- SKYRC Aluminum 1/10 TC Setup System 
- ARROWMAX Aluminum 1/10 TC Setup System (V2 & LE)

MAX-02-001 contains: 
4x MXLR Awesomatix Caster Tool

INFO: We may use additional parts, cars and/or items to display the use of our above described and named product. This additional parts, cars and/or items are NOT part of the above described and named product. The above described and named product consists only and exclusively the parts mentioned under "The product contains:"
You must read and follow the GENERAL & SAFETY PRECAUTIONS before use, which can be found here:  INSTRUCTIONS

AWESOMATIX TC MULTI TOOL (2PCS)   MAX-02-002

To unlock the full performance of the Awesomatix TC cars and further simplify the maintenance you should have the Awesomatix TC Multi Tool in your pit box! 

These tools are designed by the infinite experience of Awesomatix Team Manager Max Mächler. 
The tool set combines ALL useful and needed tools in just two lightweight and precious looking wrenches.  

Our wrenches will help to build and maintain the universal driveshafts, the gear diff and dampers with std. cups as well as with ADC cups. Experience and knowledge are the highest value when it comes to the production of specialized tools. A small example is the enlarged cavity for the AT40-1 cups which allow the oil to flow out easily at screwing of the cup to not build up any extra pressure inside the damper which may move the P63/P45R piston out of his initial position. This is the small but huge difference between perfection and just creating a tool without knowledge like some others.

Our TC Multi Tools are machined from high quality black anodized aluminum with silver edges and laser engraved logo as well as the Awesomatix part numbers on top and lower side for an easy identification.

In short, the Multi Tool for Awesomatix TC can be used to:
- tight/untight ST38 nuts of ST17-1 universal driveshafts
- hold ST17-1 universal ring to open the opposite ST38 nut
- tight/untight AT40 and AT40-1 Damper Cup
- tight/tighten AT40-ADC Damper Cup
- tight/tighten AT124B / AT123B (also useable for AT123 of A700 GD2)

MAX-02-002 contains: 
1x MX Awesomatix Multi Tool A
1x MX Awesomatix Multi Tool B

--> Check the manual/instructions here:  INSTRUCTIONS 

INFO: We may use additional parts, cars and/or items to display the use of our above described and named product. This additional parts, cars and/or items are NOT part of the above described and named product. The above described and named product consists only and exclusively the parts mentioned under "The product contains:"
You must read and follow the GENERAL & SAFETY PRECAUTIONS before use, which can be found here:  INSTRUCTIONS

Type

Scale : 1/8th

Brushed/Brushless : BL

Sensored/Sensorless : SD

Waterproof : No

Specifications

Cont./Peak Current :200A/1080A

Input Voltage : 2-4S Lipo/6-12 Cell NiMH

BEC Output :6V-8.4V adjustable, 6A

Wires & Connectors

Wires & Connectors :Black-12AWG-200mmx2

Output Wires :Black-12AWG-200mmx3

Input Connectors :No

Output Connectors :No

Fan

Size :30x30x10mm

Voltage Range :5-8.4V

Powered by :Powered by BEC

ESC Programing via

SET Button on ESC :Not Supported

LED Program Box :Not Supported

LCD Program Box :Supported

WiFi Module :Supported

OTA Programmer :Supported

Programming Port :Independent programming port

Firmware

Firmware Upgrade :Supported

Size & Weight

Size :56.1mmx42.1mmx38.6mm

Weight :114g (Including the weight of Rx wire and switch)

Applications

Applications :SL BL Motors / SD BL Motors

Vehicles :1/8thOff-Road/On-Road contest

KV Rating/T Count :4S LiPo： 4268/4274≤3000KV

X20FWD is the result of utilizing design of the X20 touring car. The chassis is based on the popular mid motor design, using a light weight and strong 1 piece motor mount concept, without any interference between the front and rear chassis flex while still allowing center flex adjustability. The advantage for this style of design is to allow maximum flex capabilities without impacting the drivetrain, meaning smoother power delivery, more consistency and less chance of stripping spurs.

After the introduction of the long awaited SRX8-T, Serpent shifted into high gear, and prepared to complete the entire 1/8th line with the SRX8-T Electric. Transforming the Nitro version into an E version in a short time was nothing short of our highest priority. Take the best Nitro Truggy we have ever developed, and go electric. Retain all the key factors: performance, reliability, durability, ease of assembly as well as maintenance, coupled with all new suspension geometry, we feel this all new E Truggy is built for success. Using all of our high quality metals, plastics and rubber, we spared zero when it came to building the best product we could. During testing this all new E truggy exceeded all expectations we have set forth. Not only did this all new E truggy out perform its predecessor, it annihilated it. It was faster, more durable, easier to drive and straight up vicious on the race track. Without Further a due, let’s get started with all the new features of the SRX8-T Electric.

Spyder SRX2 1/0 buggy in Team HT version . The Spyder SRX2 MHT Team HT edition ( high-traction) will perform best at medium to high traction tracks like carpet and astro . Specific specs of the SRX2 HT Team version - Narrow hard anodised lightweight aluminium 7075 T6 chassis with separate aluminium kick-up plate Front bulkhead alu SRX2 - Shock shaft fr TiN coated (2) - Shock shaft rr TiN coated (2) - Shock spring green 3,7lbs fr (2) - Shock spring blue 2,1lbs rr astro (2) - Machined shock pistons square 2-hole 1.3 - Smooth gear-differential - Low, cab forward light MH body - Battery plate nut in aluminium (4) Key features of the SPYDER 2wd buggy Team HT: - High performance race geometry - Carbon fibre front and rear shocktowers - Laydown transmission / motor design with light 3 gear transmission - Durable and efficient suspension - Highly efficient steering Ackermann - Big bore 12mm shocks with dual system and hard anodisied bodies and caps - 3 pad slipper clutch - Composite battery holder